Individually Handcrafted Knives for the Custom Knife Enthusiast

Stag Hunter

- - - - - - - - - - -

Not much needs to be said about Stag Hunters - they're just the best of the best.

Sadly, the selection of really nice stag just keeps getting smaller and smaller.

but, I did have this one in the stash box waiting for just the right blade.

I forged this blade into a Twist blade of Crushed Ws. Lots of work - but it always pays off.

I sed my century old wrought iron for the guard and butt cap and I heat-blued a stainless finial to set off the full take-down assembly.

Sold at the Custom Knife Collectors Assn. banquet, 2015, in Atlanta.

- - - - - - - - - - - - - -

Stag Hunter

White Iron Hunter

- - - - - - - - - - - -

How many favorite hunters can a maker have? I have a few - and this is one of them.

A style I named after a lake up here in Northern Minnesota - White Iron Lake.

this knife does not have a dropped adge, which is preferred by some users. And I forged the blade from a round bar of W1 tool steel and heat treated it to arrive at the distinctive hamon sought by many knife afficianados.

The handle was shaped from a block of Black Canvas Micarta, which is just darned near indestructible.

This knife would look at home in any hunting camp on the planet.

Built in a take-down assembly.

- - - - - - - - - - -

White Iron Hunter

Tuxedo Bowie

- - - - - - - - - -

I figure it would be suitable for the finely dressed gentleman to carry a short Bowie in his tuxedo - right?

Right.

And this is just the item to fill that need.

I forged this blade from my Andersen Forge San Mai of 1095 core steel and 420 Stainless Steel laminate.

And quite striking, it is.

The steel guard was hot-blued and the stainless steel spacer with file worked in a rope rendition.

The fabulous handle was made from a block of Stabilized Hawaiian Koa.

Just a real beauty.

- - - - - - - - - - - - -

Single Twist Hunter

- - - - - - - - - - - - -

What can I say - just a beautiful hunter.

I have an acquaintance here in Northern Minnesota, where I live, who spends the year searching for burls in the Northwoods. One of his favorite is Black Ash Burl.

I was able to acquire a nice burl from him and I got about 6 pieces cut from it that I had stabilized.

This is the first one of them that I have used.

The blade is a bit unique. Many makers - including myself - like out twist Damascus to have many, many twists that show the fantastic character that Twist Damascus is known for.

In this instance, I found that I have a cut off piece of twist that perfectly showed only two twists of the bar. I felt that these two twists showed in great detail what is really happening when we do a single twist.

(The new owner thought so, as well.)

The blade was then hot-blued upon completion.

Put together in a take-down fashion with stainless steel hardware.

- - - - - - - - - - - - - - -

Single Twist Hunter

Walnut and Damascus Hunter

- - - - - - - - - - - - - - - - - - -

Here's a nice example of the type of hunters I like to make.

I like a blade of about 4 7/8 inches with a handle and guard of around 4 3/8 inches.

This particular hunter has a Damascus blade made with laddered Ws - a style that really shows the layering quite well.

The guard on this knife was made from some 1903 wrought iron I have and wes built in a take-down assembly.

All a person could ever ask for in a hunting knife.

- - - - - - - - - - -

Damascus Hunter

Koa Fighter

- - - - - - - - - - -

Just a really nice example of the creations you can expect from Andersen Forge.

A nicely crafted San Mai blade of 1095 tool steel surrounded by a "jacket" of 420 Stainless Steel.

(Not an easy thing to do ! )

The handle is a gorgeous piece of Stabilized Curly Koa from Hawaii. This material has chatoyance that must be seen in person.

The Take-Down fittings are hot-blued mild steel.

The hot-blued spacer is grooved for people with "good taste".

- - - - - - - - -

Bubinga Fighter

- - - - - - - - - - - -

Yep - this here is for the "Fighter" enthusiast who THOUGHT! he had seen 'em all.

What a beauty.

I got some really nice Stabilized Bubinga and mated it up with a 10" Fighter blade of W2 tool steel that I forged down from very large round stock.

A clay process influenced the distinctive hamon after etching.

And to top it off, I made the guard from some quality 1903 Wrought Iron.

This li'l Honey is now living happily in Brazil.

- - - - - - - - - - - - -

Bubinga Fighter

Brother and Sister

A really fun prject here.

I had a good customer ask for two knives - 1 each for his son and daughter - of matching materials.

The son is a United States Marine.

The daughter is a sister very proud of her brother.

Both blades were forged from 1095FG tool steel and 420 Stainless Steel San Mai.

Bother were made in a take-down assembly utilizing 416 stainless hardware and some rather uncommon Franquette Walnut from Northern California.

I am proud to have been asked to make these knives.

- - - - - - - - - - -

Brother Bowie

Sister Hunter

Walnut Hunter

Another great San Mai Hunter from Andersen Forge. Good thing I like making these fine items - I've got an order list that lasts until.........................

The san Mai is from my 1095FG and 420 Stianless Steel.

The take-down guard is forged from a round bar of 416.

The handle on this one is some fantastic stabilized Walnut Burl from Northern California. I have had this stuff for nearly five years and finally got some sent off to be stabilized.

Very cool material.

- - - - - - - - - - - - - - - -

Walnut Hunter

White Iron Hunter II

As many as maybe 6 or 7 years ago, I designed a knife very similar to this, that I named the White Iron Hunter after a particular lake in the Boundary Waters Canoe Area Wilderness that I am familiar with.

This is a slight deviation from that design, so, to stay true to the original, this is named the White Iron Hunter II.

This blade profile is nearly an exact duplicate of a late 18th century trapper's blade I examined on an antique firearms dealer's table at a show in Michigan.

This blade was forged from a 1 1/8" round bar of W1 tool steel and heat treated with clay to produce the distinctive hamon resulting in a differential hardening of the blade.

The take-down assembly is facilitated with a 416 stainless steel guard.

The handle is from a small selection of stabilized Franquette Walnut that I have.

I often suggest the appearance is that of velvet.

It is truly unique and beautiful.

I get extrordinary performance from my W1 procedure.

- - - - - - - - - - - - - -

White Iron Hunter II

Ebony Fighter

- - - - - - - - - -

Just makes ya' want to stab something - doesn't it?

I forged this Fighter Blade from a 1 1/8" round bar of W2 Tool Steel and gave it the ol' clay process while hardening to leave the distinctive Hamon.

The handle was made from a realy nice, solid block of Macassar Ebony. A really nice piecce of Macassar shows multi-colored striations of black and brown hues rather than a plain simple black.

The easy "S" guard was forged from a 1 1/8" round bar of 416 stainless steel.

All in a take-down package.

Sweet - eh?

- - - - - - - - - -

Ebony Fighter

Cowboy Bowie

- - - - - - - - - - - -

Pardner, this one here is to strap onto the gun belt.

A nice Cowboy Bowie for the distinctive "prairie bum".

I forged the blade from a large round stock of W1 Tool Steel.

The fittings were forged from a large bar of 416 Stainless Steel. All of these disassemble to completely remove trail dust at the end of the day.

Now - when was the last time you saw a chunk of Stabilized Spalted Pecan?

Probably never.

I got this from a good buddy in Georgia.

All in all, a very nice package.

- - - - - - - - - - - -

Cowboy Bowie

Click on photos for enlargement

ANDERSEN FORGE - Continuing the Art of the Forged Blade.

Quality - not quantity. Value - not price.

INTRODUCTION

UPDATE

Featured Knife!

Knives For Sale

Recently Completed Knives

"Gunflint Bowie" Project

Hunting/Camp Knives

"Four Brothers" Project

Blade Show 2016

Andersen Forge Videos 1

Knife Gallery 26

Knife Gallery 25

Knife Gallery 24

Knife Gallery 23

Knife Gallery 22

Knife Gallery 21

Knife Gallery 20

Knife Gallery 19

Knife Gallery 18

Knife Gallery 17

Knife Gallery 16

Knife Gallery 15

Knife Gallery 14

Knife Gallery 13

Knife Gallery 12

Knife Gallery 11

Knife Gallery 10

Knife Gallery 9

Knife Gallery 8

Knife Gallery 7

Knife Gallery 6

Knife Gallery 5

Knife Gallery 4

Knife Gallery 3

Knife Gallery 2

Knife Gallery 1

Knife Construction

Testimonials

ARCHIVES

Payment and Contact Info

Memorable Quotes

LINKS